Materials Startseite 9 Sheet metal working 9 Materials Materials for shims and shim washers Standard materials for shims and shim washers are rust-resistant stainless steel, cold-rolled strip steel, aluminum, brass, and plastic (PET). In addition to the usual standard materials, we also process a wide range of special materials on request. Aluminum Stainless steel Steel Brass Plastic Materials for solid sheets Single sheets can be processed from a thickness of 0.05 mm up to 20 mm as standard. The material specifications of our standard plates can be found in the table below. You can also obtain parts with surface finishes from us e.g. brushed or ground stainless steel, or galvanized sheet steel. If you need more materials, we will be happy to check your request for availability. Stainless steel Material designationMaterial No. X5CrNi18-101.4301 X10CrNi18-8 1.4310 X5CrNiMo17-12-2 1.4401 X6CrNiTi18-10 1.4541 X6CrNiMoTi17-12-21.4571 Steel Material designationMaterial No. DC011.0330 DC031.0347 DC041.0338 XC751.1248 DX51D1.0226 Aluminum Material designationMaterial No. AI99 /EN AW-1200 / EN AW-AI 99,03.0205 AICuMg2 / EN AW-2024 / EN AW-AI Cu4Mg3.1355 Brass MaterialMaterial designationMaterial No. BrassCuZn332.0280 BrassCuZn302.0265 BrassCuZn102.0230 Shims Shim washers Sheet metal parts Materials for laminates The individual layers of metal foils and laminates are available in even smaller thicknesses than solid individual sheets. Here, the foil thicknesses start at 0.025 mm. In addition to metallic materials, layered shims are also available in lighter and more easily removable plastic. Stainless steel Material designationMaterial No. X5CrNi18-101.4301 X10CrNi18-8 1.4310 X5CrNiMo17-12-2 1.4401 X6CrNiTi18-10 1.4541 X6CrNiMoTi17-12-21.4571 Steel Material designationMaterial No.Film thickness (mm)max. plate size (mm) DC011.03300,0251220 x 400 0,05 / 0,075 / 0,1 / 0,2 1220 x 610 DC031.03470,0251220 x 400 0,05 / 0,075 / 0,1 / 0,2 1220 x 500 Aluminum Material designationMaterial No.Film thickness (mm)max. plate size (mm) AI993.02050,05 / 0,075 / 0,1 / 0,21220 x 500 AI 99,53.13550,05 / 0,075 / 0,1 / 0,21220 x 304 Brass Material designationMaterial No.Film thickness (mm)max. plate size (mm) CuZn332.02800,025 / 0,05 / 0,075 / 0,1 / 0,21220 x 305 CuZn372.02650,025 / 0,05 / 0,075 / 0,1 / 0,21220 x 305 CuZn102.02300,0251220 x 304 0,05 / 0,075 / 0,1 / 0,2 1220 x 610 Plastic Material designationMaterial No.Film thickness (mm)max. plate size (mm) PolyesterMylar® (Dupont)0,025 / 0,05 / 0,075 / 0,1 / 0,2 - PolyimidKapton® (Dupont) 0,025 / 0,05 / 0,075 / 0,1 / 0,2 - Laminated sheet metal parts Send us your request now We manufacture shims and shim washers according to your requirements, technical drawings, and drafts. Send us a request with your drawing. We will be happy to make you an offer based on this data. Send your request now +49 (0) 9856 9798-0 We work for you precisely Accuracy and diligence play just as important a role for us as they do for your machines and systems. individually We manufacture shims and underlays exactly according to your customer-specific requirements. personally We will be happy to advise you personally! Together we will find the right solution for your application. fast We supply standard shims directly from stock, and we also manufacture custom sheet metal parts promptly.
